- PACKAGE: There are 12 packs of black soundproof foam panels in the package and the size of each foam panel is 2*12*12 inches(5*30*30cm).
- ACOUSTIC FOAM RECOVERY METHOD: There are two ways to get back to the normal size of pyramid acoustic foam. One is to open the vacuum package and put the acoustic foam in a ventilated place for about 24-48 hours. Another way is to soak the acoustic foam in water for 1 minute. Then you should use hair dryer or let it dry naturally after wringing out the foam.
- HARMFUL SOUND ELIMINATION: The sound will become much clearer by using acoustic foam material to eliminate harmful sound. Thus, the sound in lecture room or performance venue will be definitely improved after using this material, meanwhile, it can reduce all flapping, vibrating echoes, waves and reverberation in the room.
- THICK & ADVANCED MATERIAL: We use thick material of inflaming retarding and environmental protection for sound absorbing foam panels. Therefore, it can be safely used in some small and medium-sized rooms. The foam panel can well absorb the sound and reduce waves, reverberation and flutter echo.
- EXTENSIVE USE: There is no doubt that acoustic foam material is a good solution to reduce cost and a better recording effect can be achieved at home or in the studio. Anyway, you can apply it to various occasions, like rehearsal room, concert hall, podcast, office, church or kennel etc.
As you may already know, sound waves travel in all directions of the room. When they come across obstacles like walls or furnitures, they either bounce off them, creating echoes, or they continue vibrating inside the surrounding structure, as impact noise.Therefore, if we can use the certain sound absorbing materials, you can significantly lessen these kinds of reverberations.
However, what kind of sound absorbing materials should we choose? That must be Acoustic Foam!
ACOUSTIC FOAM MATERIAL:
The acoustic foam material can help eliminate harmful sound and at the same time, the sound will be much clearer. In this way, it can improve the sound quality either in the lecture room or performance venue. All flapping, vibrating echoes, waves and reverberations can be well reduced.
Our sound absorbing foam panel is made from thick material, which is proved to be fireproof. This thicker foam panel can be used for better sound absorption and it is good for wave, reverberation and flutter echo reduction in a small and medium-sized room.
This acoustic foam panel has a wide range of application because of its low-cost solution, so you can obtain a better recording sound effect both at home or in the recording room. All in all, it can be widely used in work shop, podcast, church, home theatre, home studio or utility closet and more.
12 * Acoustic Sound Panels
Everyone has different sensitivity to the smell, so somebody might feel there is slight smell when opening. But please rest assured that it is not the harmful smell, it is just the regular foam smell.
Here are some suggestions to get rid of the smell.
1.The Most Effective and Fastest Way: Soaking foam in water and letting air dry.
2.Convenient Way: Open the package and put the foam in a ventilated place for 3-4 days before using.